Muratec MFX-2350 User Manual page 591

Note Note
If the quick memory If the quick memory
transmission is set transmission is set
to OFF, the message to OFF, the message
"Continue storing?" is "Continue storing?" is
displayed. displayed.
Press [Yes] to continue Press [Yes] to continue
scanning. In case of scanning. In case of
transmission, press [No] transmission, press [No]
to stop transmitting. In to stop transmitting. In
case of copying, press [No] case of copying, press [No]
to start copying only the to start copying only the
scanned document. scanned document.
Replace the jammed Replace the jammed
document and press document and press
[Start] or the <Start> key. [Start] or the <Start> key.
Scanning of the document Scanning of the document
will start. will start.
3 (1) Turning the dial, discharge
the jammed document.
(2) Lift up the document tray.
(3) Gently pull out the jammed
document.
4 Lower the document tray. Close
the ADF cover.
5
The error message will be
printed, indicating the number of
pages where the document jam
occured. Replace the jammed
document and resend it.
Document Jams
(3) (3)
●
In This Case... Maintenance and Troubleshooting
Getting
Started
COPY
Chapter1
(1) (1)
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
(2) (2)
Chapter2
FAX
Chapter3
FAX
Chapter4
FAX
Chapter5
SCAN
Chapter1
SCAN
Chapter2
SCAN
Chapter3
Function
Settings
In This
Case...
Appendix
6-15