Function
Settings
Function
Network Setting
Server Data Clear Clear the data specifi ed in the network settings, such as IP address.
Color Fine
Adjustment
Note
Underlined items are the factory default.
Printing the device management list
The settings for the various functions set in the device management can be printed out for checking.
5-36
Function Settings
■Ping
Ping is used to check the MFP is connected to a PC. Enter the PC's
IP Address and press [Run] for checking the connection.
When "Packets : Sent=4 Received=4" is displayed, the connection is normal.
■LDAP Settings
●LDAP Server Setting ... You can set up to fi ve servers to be used
for the LDAP search. You can also set the
default server to be used for general search.
●LDAP Parameter Settings ... You can set the parameters to be used for
search.
All data specifi ed in Offi ceBridge will be also cleared by this operation.
To clear data, enter the Offi ceBridge administrator password. If no
password is set, enter none and press [Enter].
Normally no need to perform this function.
1
Press the <List> key.
Description
Setting option
Not registered at
shipment.
Name1: cn
Name2: commonname
Mail1: mail
Mail2:
Fax1:
facsimiletelephonenumber
Fax2:
Tel1: telephonenumber
Tel2:
Org.1: o
Org.2: ou
Refer to "Color fi ne
adjustment" (page 6-49)