Scanner Default Setting List - Muratec MFX-2350 User Manual

SCAN
Chapter3

Scanner default setting list

Function
Doc.Type
Contrast
Resolution
Scan Size
Divide Tx
File Format
Finishing
Prty mode
Contrast
Hue
4-88
●
SCAN Chapter3
This sets the default level for resolution when a document is
scanned. By setting it to a level suitable for the most commonly
sent document type, you can reduce the time and effort
required when making changes.
This sets the default level for contrast when a document is
scanned. By setting it to a level suitable for the most commonly
sent document type, you can reduce the time and effort required
when making changes.
This sets the default level for resolution when a document is
scanned. By setting it to a level suitable for the most commonly
sent document type, you can reduce the time and effort
required when making changes.
This sets the default size when a document is scanned.
This sets whether or not to divide scanned multi-page
documents into one page and transmit each page as the
separate document (divide transmission).
When scanning both sides of a document, combine both pages
into one document and transmit it.
This sets the default fi le format when a scanned document is
saved.
This sets the default sorting method for discharged paper
when the scan to printer function is used.
Select the scanning mode displayed fi rst in the scanner
standby screen, either "Color" or "B&W".
This sets the default contrast (difference between brightness
and darkness) for color scanning.
This sets the default hue (balance of red and green) for color
scanning.
Scanner Function Settings
Description Setting option
"B&W: Auto
Text&Photo
Photo
Color: Auto
Text&Photo
Photo
Lightest
Lighter
Normal
Darker
Darkest
200dpi
300dpi
400dpi
600dpi
Auto
Letter
Letter
H.LTR
H.LTR
Legal
11x17
ON
OFF
B&W: TIFF PDF
Color: JPEG PDF
Sort
No Sort
Color
B&W
-3 (Low)
-2
-1
0 (Normal)
+1
+2
+3 (High)
-3 (R)
-2
-1
0 (Normal)
+1
+2
+3 (G)