Interrupt Copy - Muratec MFX-2350 User Manual

Interrupt Copy

You can interrupt the current job to make another copy.
Operating tips
● Interrupting is available during copy scanning, copy printing, and while adjusting settings, such as
document type and resolution.
●Interrupting is not available during advanced copying or while setting the functions.
Note Note
The key lamp will The key lamp will
illuminate. illuminate.
1
Press the <Interrupt> key.
2 If the document remains after
copying, remove it. When copying
using the ADF, press the <Stop>
key to discharge the remaining
documents.
3 Load the document for the
interrupting copy.
4
Start copying.
Copy Ready Copy Ready
Memory Memory
Doc.Type Doc.Type
Auto Auto
Contrast Contrast
Auto Auto
DuplexCopy DuplexCopy
OFF OFF
LTR LTR
Zoom Zoom
100% 100%
LTR LTR
Finishing Finishing
LGL LGL
No Sort No Sort
11x17 11x17
Others Others
●
COPY Chapter1 Basic Copy Features
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
FAX
Set Set 001 001 Chapter5
100% 100%
SCAN
Chapter1
SCAN
Chapter2
SCAN
Chapter3
Function
Settings
In This
Case...
Appendix
2-25