Default Settings List - Muratec MFX-2350 User Manual

COPY
Chapter3

Default settings list

Function
Document type
Contrast
Zoom
Sort
Margin
Erase border
Erase center
*Underlined items are the factory default.
Other settings list
Function
Separator line width
Scan compression mode
Copy reservation
*Underlined items are the factory default.
2-106
●
COPY Chapter3
Description
This sets the default setting for the resolution
of the document to be copied. Matching the
settings to the frequently copied documents
can shorten the time required to adjust
settings.
This sets the default setting for the contrast
of the document to be copied. Matching the
settings to the frequently copied documents
can shorten the time required to adjust
settings.
This sets the default setting for the zoom copy
magnifi cation.
Sort will be defaulted to ON.
Setting this to ON makes it possible to always
have a margin added even without setting a
margin in the advanced copy. In addition, the
top, bottom, right, and left margin widths can
be set as default values.
Setting this to ON makes it possible to always
perform erase border even without setting
erase border in the advanced copy. In addition,
the erase width default value can be set.
Setting this to ON makes it possible to always
perform erase center even without setting
center border in the advanced copy. In addition,
the center erase width default value can be set.
The width of the printed separator line can be
set when setting the separator line for combine
copy or repeat.
The scanned image can be compressed and
stored in memory. More document sheets can
be stored in memory by setting the image
compression mode to HIGH. (This slows down
the scan speed.)
The next document can be scanned while the
current document is being copied. Setting
this to [OFF] prohibits scanning of the next
document.
Advanced Copy Settings
Auto, Text & Photo, Photo, Background
Auto, Lightest, Lighter, Normal, Darker,
Darkest
Auto, 100%
Sort, No Sort
●Specifying the margin
●Setting the margin width default value
●Specifying the erase border
●Setting the erase border width default value
●Specifying the erase center
●Setting the erase center width default value
Description
Setting option
ON, OFF
Left/Right/Top/Bottom -1.0 - 1.0": 0.0"
ON, OFF
T&B Border 0.2 - 2.0" : 0.2"
R&L Border 0.2 - 2.0" : 0.2"
ON, OFF
EraseWidth 0.1 - 2.0" : 0.1"
Setting option
0.01 - 0.05" in. : 0.01"
NORMAL, HIGH
ON, OFF