Muratec MFX-2350 User Manual page 120

COPY
Chapter1
Note Note
The key lamp will go out. The key lamp will go out.
Note Note
· Press [Scanning end] · Press [Scanning end]
to copy the documents to copy the documents
which have been which have been
scanned halfway. scanned halfway.
· When the interrupt · When the interrupt
was made during copy was made during copy
printing, the following printing, the following
copy will be printed. copy will be printed.
Note
· After interrupt copying, press the <Interrupt> key to cancel the interrupt. Interrupt function cannot be automatically
cancelled.
· Interrupt operation by the <Interrupt> key is available only for copying. The <Interrupt> key cannot be used for the
interrupt of fax transmission.
· If you press the <Interrupt> key to cancel the interrupt during interrupt copying, the interrupting copy is cancelled.
2-26
●
COPY Chapter1
5 (1) After copying, press the
<Interrupt> key.
(2) The screen returns to the
setting before the interrupt.
6 Load the document before the
interrupt and press [Scan next
page].
Basic Copy Features
Copy Ready Copy Ready
Set the document From Page : 3 Set the document From Page : 3
Memory Memory
Doc.Type Doc.Type
Auto Auto
Contrast Contrast
Auto Auto
Zoom Zoom
100% 100%
LTR LTR
LTR LTR
Scan Scan Scanning Scanning
LGL LGL
next page next page
11x17 11x17
98% 98%
end end