Regulatory Information; Getting Started - Muratec MFX-2350 User Manual

Getting
Started

Regulatory information

Customer information
United States of America
The MFX-2850/MFX-2350 (hereafter referred to as "the product") complies with Part 68 of FCC rules and the
requirements adopted by the ACTA. On the rear panel of the product is a label that contains, among other
information, a product identifi er in the format US:DKUFA02B001J. If required, this number must be provided to
the phone company.
The REN is used to determine the number of devices that may be connected to a phone line. Excessive RENs
on a phone line may result in the devices not ringing in response to an incoming call. In most but not all areas,
the sum of RENs should not exceed fi ve (5.0). To be certain of the number of devices that may be connected to a
line, as determined by the total RENs, contact the local phone company. The REN for this product is part of the
product identifi er that has the format US:DKUFA02B001J. The digits represented by 02 are the REN without a
decimal point.
The product is designed for use on standard-device phone lines. The product connects to the phone line with a
standard line called the USOC RJ-11C.
Any plug and jack used to connect the product to the premises wiring and phone network must comply with the
applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant phone cord and modular plug
is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant.
See installation instructions for details.
If the product causes harm to the phone network, the phone company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice isn't practical, the phone company will notify
the customer as soon as possible. Also, you will be advised of your right to fi le a complaint with the FCC if you
believe it is necessary.
The phone company may make changes in its facilities, equipment, operations or procedures that could affect the
operation of the equipment. If this happens the phone company will provide advance notice in order for you to
make necessary modifi cations to maintain uninterrupted service.
If trouble is experienced with the product, see operating instructions for details. For further repair or warranty
information, please contact Muratec Customer Support Center at 800-347-3296 (from the U.S. only). If the prod-
uct is causing harm to the phone network, the phone company may request that you disconnect the equipment
until the problem is resolved.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public
service commission or corporation commission for information.
If your home has specially wired alarm equipment connected to the phone line, ensure the installation of the
product does not disable your alarm equipment. If you have questions about what will disable alarm equipment,
consult your phone company or a qualifi ed installer.
1-2

Getting Started

Getting Started