Muratec MFX-2350 User Manual page 334

FAX
Chapter2
Note
Erase Tx Doc
If the Erase Tx Doc is set
to ON, documents will
be deleted after polling
transmission.
Note
I.D.Code
I.D. code must be entered
to print out stored
documents, etc. Make a
record not to forget it.
Note
If you enter an incorrect
code, press [Clear] to
delete it and then enter
the correct one.
Note
Press the <Reset> key
to return to the standby
screen.
3-132
●
FAX Chapter2 Advanced Fax Features
■
Setting deletion of documents after transmission
(1) Press [ ], then press [Erase
Tx Doc].
(2) Press [ON] or [OFF] and
press [Enter].
■
Entering an I.D. code
(1) Press [ ], and then
[I.D.Code].
(2) User the numeric keys to
enter the I.D. code (4 digits)
and press [Enter].
5 To continue to register other
F-code boxes, press [Enter]
twice, then repeat from step 5 of
"Registering F-code boxes" (page
3-124).
Bulletin Box
Select item to edit.
2/2
Erase Tx Doc:OFF
I.D.Code :
Bulletin Box
Select ON/OFF and select [Enter].
Erase Tx Doc Cancel
OFF ON
Bulletin Box
Select item to edit.
2/2
Erase Tx Doc:OFF
I.D.Code :
Bulletin Box
Enter I.D.Code/password
I.D.Code Cancel
**** _
Clear
Enter
Enter
Enter
Enter