Part Names And Functions - Muratec MFX-2350 User Manual

Getting
Started

Part names and functions

■
Main unit
No.
1 Right cover
2 Right cover release lever
3 Right lower cover
4 Bypass tray
5 Extension tray
6 Paper loading guide
7 Slide plate
8 Slide plate knob
9 Right lower cover release lever (C2) Pull up this cover to open the right lower cover.
10 Paper level indication window
11 Front cover
12 Control panel
13 ADF cover
14 ADF cover release lever
15 Document guide
16 Document tray
17 Document output tray
18 Document output extension tray Pull out this tray when using a long document.
1-12
Getting Started

Part Names and Functions

13 14
12
11
10
Name
This is opened to remove jammed paper or to change the drum cartridge.
(C1) Pull up this lever to open the right cover.
This is opened to remove jammed paper.
This is used to copy or print special or custom paper, such as postcards and
envelopes. (page 2-15)
This is extended when loading large-size paper.
This is adjusted to match the width of the paper.
Pull out this plate when the paper in the bypass tray jams.
(C3) Hold this knob when pulling out the slide plate.
The red shown in this area increases as the level of the paper in the paper tray decreases.
(B) This is opened to replace the toner bottle. (page 6-19)
This is where the keys and touch screen required for operation are grouped.
This is opened when a document jams or to when cleaning the scan area.
(A1) Pull up this lever to open the document cover.
This supports the document so that it feeds straight.
Place the document surface to be copied or transmitted upward in this tray.
Original documents after scanned for coping or transmission are output in this tray.
15 16
9 8 7
Description
17
18
1
2
3
4
5
6