If A Paper Jam Occurs In The Bypass Tray - Muratec MFX-2350 User Manual

In This
Case...

If a paper jam occurs in the bypass tray

Paper jam! Paper jam! Paper jam!
Open & check the
blinking cover.
Error reset guidance Error reset guidance
6-8
●
In This Case... Maintenance and Troubleshooting
1 Remove the paper in the bypass
tray.
2
If you cannot remove the paper,
pull the knob (C3) on the slide
plate in the bypass tray and pull
the slide plate towards you.
3 Push down on the slide plate
with your left hand and gently
pull out the paper jammed in the
bypass tray.
4
Reinsert the slide plate.
Slide plate Slide plate