FAX
Chapter4
Entering speed-dials (Mode 1)
In Mode 1, you must add the PIN to the speed-dial number. Transmission is not possible if a PIN
number has not been entered. If Mode 2 has been set, the following entry is not necessary.
Note
Note
Refer to page 3-202, if
Refer to page 3-202, if
necessary.
necessary.
Note
Note
· If you press [Enter]
· If you press [Enter]
without entering the
without entering the
PIN, the machine beeps,
PIN, the machine beeps,
displaying "PIN is not
displaying "PIN is not
stored" on the touch
stored" on the touch
screen, and then returns
screen, and then returns
to step 2.
to step 2.
· Press the <Reset> key
· Press the <Reset> key
to return to the standby
to return to the standby
screen.
screen.
3-196
●
FAX Chapter4
Communication Management
1
Create or change an entry using
the one-touch key or speed-dial.
2
While setting up, the machine
asks you to enter the PIN. Select
[PIN] and press [Enter].
3
Use the numeric keys to enter
the desired PIN, up to eight
characters in length.
4
Press [Enter] to save the PIN.
5
Press [Enter] to save the speed-
dial setting.
002:New York Office
002:New York Office
Select the line item you want to edit.
Select the line item you want to edit.
Select [Enter] to continue.
Select [Enter] to continue.
Fax No. :2222-2222
Fax No. :2222-2222
Name
Name
:New York Office
:New York Office
Group No:01,02,03
Group No:01,02,03
PIN
PIN
:
:
002:New York Office
002:New York Office
Enter PIN
Enter PIN
PIN
PIN
Cancel
Cancel
_
_
Clear
Clear
Enter
Enter
Enter
Enter