Print Machine Parameters, Memory Switch And Unique Switch Settings; Factory Functions - Muratec MFX-3595 Field Engineering Manual

3.13 Print machine parameters, memory switch and
unique switch settings
This function instructs the unit to print a list of the machine parameter, memory switch and unique switch set-
tings. The list shows the default and current settings for each.
1. Press <Mode>, <*>, <1>, <0>.
2. Select [ON] to enable duplex printing, or [OFF] to disable it.

3.14 Factory functions

This function provides several machine test.
Test list
Test
LED test
LCD test
Panel test
DRAM check
RTC test
Pseudo ring test
Forced toner supply mode
Serial number writing
USB test pattern print
MAC address writing
3.14.1 LED Test
1. Press <Mode>, <*>, <1>, <1>, then select [LED Test].
2. Press <Start>.
When you press <Start>, the LED illuminates in the following order:
All LEDs OFF  Green ON  Orange ON  All LEDs ON  All LEDs OFF.
Light on all the LED lamps to check that the lamps are working.
Display test patterns on the LCD to check for dead pixel.
Display the key name on the LCD when the key is pressed.
You can check that the keys are working.
Check that the DRAM is working correctly.
Check also when the memory is expanded.
Factory use only.
Check the bell of external telephone and the pseudo ring.
Factory use only.
Factory use only.
Factory use only.
Factory use only.
3-92
Contents