Documents Erased Notifi Cation - Muratec MFX-2350 User Manual

Documents erased notifi cation
● When the image data stored in memory is erased by accident, a notifi cation will be printed as
soon as the power recovers, listing information about the erased image data.
● The following is an example of erased notifi cation when an out-of-paper reception document
has been erased. In addition, "Command erased", "Erased Poll Documents" and "F-Code box
document erased" may be printed.
1
1. No.
The number of the communication
2. Name
Recorded in the following order
(1) Sender name registered in the other party
(2) Sender number registered in the other party
(3) Blank
3. Mode
Resolution in the communication
4. Start
The time the communication started
5. Time
The time required for the communication
6. Page
The number of pages received
2 3 4
7. Dept
8. Result
9. Note
When Power Failure Occurs
5 6 7 8
When the department management has been set,
the department number is recorded here.
Communications results.
· OK ...................... Completed normally
· * .......................... Communicated in ECM mode
· # .......................... Communicated via super G3
· Error codes ......... Finished abnormally (For more
details about the error code, refer
to page 6-30.)
· Polling ................ Polling reception
· Manual ............... Manual reception
· F-Code polling ... F-Code polling
· F-Code relay ...... F-Code relay reception
●
In This Case...
9
Maintenance and Troubleshooting
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
FAX
Chapter5
SCAN
Chapter1
SCAN
Chapter2
SCAN
Chapter3
Function
Settings
In This
Case...
Appendix
6-41