Muratec MFX-2350 User Manual page 622

In This
Case...
Symptom
The whole paper is printed in
black.
Nothing is printed.
Blank spots are printed
PRINTER
PRINTER
The paper comes out wrinkled
or with the letters blurry
Blank spots are printed in the
paper feeding direction
PRINTER
PRINTER
PRINTER
PRINTER
PRINTER
PRINTER
6-46
●
In This Case... Maintenance and Troubleshooting
Cause
The drum unit is worn out or bro-
ken.
The machine may malfunction.
Several sheets of paper were fed
through at the same time.
The drum unit has run out of toner. Replace with a new drum unit.
The drum unit is worn out or bro-
ken.
The machine may malfunction.
Isn't the document loaded upside
down?
The paper is damp.
You are using the wrong type of
paper.
The document glass is dirty.
You are using the wrong type of
paper.
The paper is damp.
The drum unit is not set properly.
The drum unit is worn out or bro-
ken.
The ADF glass is dirty.
Countermeasure
Replace with a new drum unit.
Contact your Muratec dealer.
Flutter the pages before loading
paper.
Replace with a new drum unit.
Contact your Muratec dealer
Load the document correctly.
Replace with a new paper.
Use the right type of paper.
Clean the document glass.
Use the right type of paper.
Replace with a new paper.
Set the drum unit properly.
Replace with a new drum unit.
Clean the ADF glass.
Reference page
6-18
–
1-35
6-18
6-18
–
1-49
1-35
1-31
6-24, 6-25
1-31
1-35
6-18
6-18
6-24, 6-25