Muratec MFX-2350 User Manual page 494

SCAN
Chapter2
Note Note
The template should be The template should be
registered in advance. registered in advance.
(Refer to the "PC User's (Refer to the "PC User's
Guide" for instruction.) Guide" for instruction.)
4-50
●
SCAN Chapter2
12 Press [Enter].
13 Select a destination(s).
14 Press the <Start> key.
■
Using a registered template
You can select a registered template to simplify the entry process. You
can register up to ten templates.
1 Load the document.
2 Press the <SCAN> key.
3 Press [E-mail].
4
Press [Others].
5
Press [E-mail Subject].
6 Press [Template].
7
Select the desired template.
If the desired template is not
shown on the display, press [▲]
or [▼] to switch the page.
Advanced Scanner Features
E-mail Subject E-mail Subject
Add a subject line and message, Add a subject line and message,
or select a template, then press [Enter]. or select a template, then press [Enter].
Subject :E-mail Message Subject :E-mail Message
Mail Text: This is an E-mail message. Pl Mail Text: This is an E-mail message. Pl
Template Template
E-mail Subject E-mail Subject
Select a template and press [Enter]. Select a template and press [Enter].
Template Template Cancel Cancel
Fixed text Fixed text
Fixed text (Subject only) Fixed text (Subject only)
01:Notification 01:Notification
02:Confidential 02:Confidential
03:Invitation 03:Invitation
Enter Enter
Enter Enter
1 1
/ /
3 3