Setting To Be Copied In The Specifi Ed Size - Muratec MFX-2350 User Manual

COPY
Chapter2
Setting to be copied in the specifi ed size (XY size (inch) magnifi cation)
● Enter the post-copy vertical and horizontal size to have the machine calculate the
magnifi cations to match the specifi ed size for copying.
●The copied image could run off depending on the paper and document. (Custom documents, etc.)
● This setting cannot be made if the calculated magnifi cation is set to 25% or less or 400% or
more.
Operating tips
When the document is loaded before setting the XY Zoom, the document size will be entered automatically.
(When automatic detection is possible)
Note Note
· When XY Zoom % is set, · When XY Zoom % is set,
the screen from step the screen from step
4(1) on the previous 4(1) on the previous
page will be displayed. page will be displayed.
· To set [XY inch], press · To set [XY inch], press
[XY Zoom]. [XY Zoom].
2-60
●
COPY Chapter2
1
(1) Press the <COPY> key.
(2) Set the documents.
2
(1) Press [Others].
(2) Press [XY Zoom].
3 (1) Press [XY inch].
(2) Press [Enter].
4
(1) Select the size you want to
change.
Advanced Copy Features
Copy Functions Copy Functions
Select the item and select [Enter]. Select the item and select [Enter].
XY Zoom XY Zoom Cancel Cancel
OFF OFF XY % XY % XY inch XY inch
The (X) axis and (Y) axis of both the The (X) axis and (Y) axis of both the
document and recording paper can be document and recording paper can be
adjusted. adjusted.
XY Zoom XY Zoom
Adjust the ratio and select [Enter]. Adjust the ratio and select [Enter].
XY Zoom XY Zoom
XY inch XY inch
L 100% W 100% L 100% W 100%
Ppr. Ppr.
Doc Length Doc Length
8.5" 8.5"
Doc. Doc.
Doc Width Doc Width Ppr Width Ppr Width
11.0" 11.0" 11.0" 11.0"
Enter Enter
Enter Enter
Ppr Length Ppr Length
8.5" 8.5"