Muratec MFX-2350 User Manual page 345

Note
· The password must be
entered with up to 20
numerals, * or #.
· If a password is not
required, press [Enter]
without entering
anything, and then
proceed to step 5.
Note
· Press [FPolling] again
to return to the screen
in step 4, where you can
correct the sub-address
and/or password if
entered incorrectly.
· Press the <Reset> key
to release the F-code
polling setting.
Note
· The numeric keys, one-
touch keys, speed-dials,
address book, group and
OB address book can be
used.
· Up to 530 destinations
can be specifi ed. (Up to
30 destinations can be
specifi ed using numeric
keys.)
4 (1) Use the numeric keys to enter
a password.
(2) Press [Enter].
5
Press [Enter] to return to the
standby screen.
6 Enter the destination fax
number and press the <Start>
key.
F-Code Communications
Fax Funcitons
If a password is required enter
the password and select [Enter].
Password Cancel
*112233* _
Clear
Fax Functions
Select item to edit.
2/2
Enlarge Tx Polling FPolling
100% OFF ON
Memory Tx Dialing Auto Rx
ON Options ON
Closed Tx ID Check
Index
OFF OFF
●
FAX Chapter2 Advanced Fax Features
Getting
Started
Enter
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
Enter
F-Code Tx
OFF
FAX
Broadcast
OFF
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
FAX
Chapter5
SCAN
Chapter1
SCAN
Chapter2
SCAN
Chapter3
Function
Settings
In This
Case...
Appendix
3-143