Setting The Running Speed For The Macro Program - Muratec MFX-2350 User Manual

Setting the running speed for the macro program

The running speed for each step in the macro program can be adjusted. It is helpful when you
want to monitor the operation on the display.
Note Note
If nothing is entered in If nothing is entered in
"Macro No.", the screen in "Macro No.", the screen in
step 3 will be displayed. step 3 will be displayed.
Note Note
Press the <Reset> key Press the <Reset> key
to return to the standby to return to the standby
screen. screen.
1 Press the <Macro Program> key.
2
Press [Enter].
3 Press [Key Speed].
4
(1) Select the running speed.
(2) Press [Enter] to set the
running speed.
Macro program
Default: Normal
Run Run
Select the program number. Select the program number.
Selact Enter to return to the previous menu. Selact Enter to return to the previous menu.
1:Sort Copy Reduce 81% 1:Sort Copy Reduce 81%
2:Department List 2:Department List
3:Not registered! 3:Not registered!
4:Not registered! 4:Not registered!
5:Not registered! 5:Not registered!
6:Not registered! 6:Not registered!
Macro Macro
Select item to edit. Select item to edit.
Run Run Enter/Edit Enter/Edit Delete Delete
Edit Title Edit Title
Macro Macro
Select the key speed and select [Enter]. Select the key speed and select [Enter].
Key Speed Key Speed Cancel Cancel
Fastest Fastest Fast Fast Normal Normal
Slow Slow
(1) (1)
Function Settings
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
Enter Enter
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
Enter Enter
Key Speed Key Speed
Normal Normal
FAX
Chapter4
FAX
Chapter5
SCAN
Enter Enter
Chapter1
(2) (2)
SCAN
Chapter2
SCAN
Chapter3
Function
Settings
In This
Case...
Appendix
5-9