Muratec MFX-2350 User Manual page 338

FAX
Chapter2
Note
I.D.Code
I.D. code must be entered
to print out stored
documents, etc. Make a
record not to forget it.
Note
If you enter an incorrect
code, press [Clear] to
delete it and then enter
the correct one.
Note
Press the <Reset> key
to return to the standby
screen.
In this case
To change the settings of F-code boxes...
Repeat the setting process, pressing [Clear] to delete information you want to change, and then enter the new
settings.
To change the box type...
Delete the F-code box you want to change, and register it again.
3-136
●
FAX Chapter2 Advanced Fax Features
■
Entering an I.D. code
(1) Press [ ], and then
[I.D.Code].
(2) User the numeric keys to
enter the I.D. code (4 digits)
and press [Enter].
6 To continue to register other
F-code boxes, press [Enter]
twice, then repeat from step 5 of
"Registering F-code boxes" (page
3-124).
Relay Box
Select item to edit.
2/2
I.D.Code :
Relay Box
Enter I.D.Code/password
I.D.Code Cancel
**** _
Clear
Enter
Enter