3.13 Print Machine Parameters, Memory Switch and
Unique Switch Settings
This function instructs the unit to print a list of the machine parameter, memory switch and unique switch
settings. The list shows the default and current settings for each. After printing, the unit returns to standby.
1. Press <Menu>, <*>, <1>, <0>.
Memory Switch
** Printing **
3.14 Factory Functions
This factory functions provide several machine testes including LED and LCD tests, a keypad test,
memory tests, a RTC test, and optional RS–232C test port test.
1. Press <Menu>, <*>, <1>, <1>.
Factory Func List
2. To select the desired test mode, press number as indicated in the following list.
• Prints a list of the Factory Functions
• LED test
• LCD test
• Key Panel test
• SRAM check
• DRAM check
• RTC test
• Page memory check
• Generate bell test
3.14.1 Function List
Press <Menu>, <*>, <1>, <1>. Then press <Enter>. A list of the Factory Functions will be printed. After
printing the unit will return to standby.
3.14.2 LED Test
1. Press <Menu>, <*>, <1>, <1>, < >, then press <Enter>.
LED Test
Pressing <Start> once, all green LEDs will turn on.
Pressing <Start> twice, all red LEDs will turn on.
Pressing <Start> three times, all LEDs will turn on.
2. Press <Stop> to exit the test mode.
/ /Enter
3-130