Setting The Paper Size And Type; Setting The Paper Type; Setting The Paper Source; Selecting An Output Location - Muratec MFX-3550 User Manual

Media and tray
process, wet ink can come off preprinted paper, reducing print quality.

SETTING THE PAPER SIZE AND TYPE

After loading paper in the paper tray, set the paper size and type using the control panel. These
settings will apply to copy and fax modes. For computer printing, select the paper size and type in the
application program you use on your computer. (See
The settings made from the machine driver override the settings on the control panel.
Setting the paper size
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Paper Setup and press OK.
4. Press the up/down arrow to highlight Paper Size and press OK.
5. Press the up/down arrow to select the paper tray you want and press OK.
6. Press the up/down arrow to select the paper size you want.
7. Press OK to save the selection.
8. Press Stop/Clear to return to ready mode.
If you want to use special-sized paper-such as a billing paper, select Custom in the Paper tab
in the Printing Preferences. (See

Setting the paper type

1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Paper Setup and press OK.
4. Press the up/down arrow to highlight Paper Type and press OK.
5. Press the up/down arrow to select the paper tray you want and press OK.
6. Press the up/down arrow to select the paper type you want.
7. Press OK to save the selection.
8. Press Stop/Clear to return to ready mode.

Setting the paper source

1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Paper Setup and press OK.
4. Press the up/down arrow to highlight Paper Source and press OK.
5. Press the up/down arrow to highlight Copy Tray or Fax Tray and press OK.
6. Press the up/down arrow to select the paper tray you want.
7. Press OK to save the selection.
8. Press Stop/Clear to return to ready mode.

SELECTING AN OUTPUT LOCATION

The surface of the output tray may become hot if you print a large number of pages at once. Make
sure that you do not touch the surface, and do not allow children near it.
The machine has two output locations: the rear door (face up) and the output tray (face down).
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com manuals search engine
Opening printing
Opening printing preferences.)
79
Page 13 of 14
preferences.)
8/4/2009