Install A New Language - Nortel CallPilot Install Manual

4
5

Install a new language

Use the following procedure to install additional languages or speech
recognition on the High Availability system.
Installing a new language
Step
1
Copyright © 2007, Nortel Networks
.
Result: The Configuration Wizard: Express Configuration List
screen appears.
f. Select the Switch Configuration check box.
Result: The Meridian 1 Switch Information window appears.
g. If required, change the Switch Type, Switch Customer Number,
or Switch IP Address.
Before changing the Switch IP Address in the Configuration Wizard,
you must have changed the IP address in the AutoStart Console.
h. If required, change or add the TNs on CP2 and click Next.
i. If required, change or add the CDNs on CP2 and click Next.
j. Click Finish to complete the Configuration Wizard.
k. Perform a manual failover. For more information, see
a manual failover" (page
Result: The CallPilot resource group is automatically brought
online on the standby High Availability server (CP1).
l. After the CallPilot resource group is online on CP1, restart CP2.
On CP1, do the following:
a. Launch the AutoStart Console.
b. Wait until node CP2 and both drvE and drvF are online/green in
the AutoStart Console.
c. Enable monitoring for the CallPilot resource group. For more
information, see
(page 214).
Test new or changed TNs or CDNs to ensure system functionality.
Action
On CP1 (the active High Availability server) do the following:
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
CallPilot Configuration Wizard 147
ATTENTION
215).
"Enabling automatic failovers (start monitoring)"
—End—
"Initiating