Nortel CallPilot Install Manual page 239

Figure 152
Remote support setup for High Availability
You can dial directly into the active High Availability server (through the
USB modem) using PCAnywhere Remote Modem on the remote PC. The
PCAnywhere Host on the active High Availability server is launched and is
waiting for the incoming modem calls.
However, to dial into the standby High Availability server, you must use the
following procedure.
Copyright © 2007, Nortel Networks
.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
Support 239