Nortel CallPilot Install Manual page 189

Configure failover on the Path Test failures of the Managed
ELAN IP address
There is a small chance (less than 1%) that the Midnight Audit will trigger
a failover because of the very short switch ELAN down time if the High
Availability system connects to a Meridian 1 51/61/81 switch instead of
Meridian 1 Option 11C. Use the following procedure to configure failovers
on the Path Test failures of the Managed ELAN IP address.
Configuring failovers on the Path Test failures of the Managed ELAN
IP address
Step
1
2
3
4
5
Copyright © 2007, Nortel Networks
.
Action
Open the AutoStart Console.
Expand Resource Groups.
Take the CallPilot resource group offline. See
resource group offline" (page
For the CallPilot resource group, select the Settings tab.
Select the Managed ELAN IP address. For example, 47.0.30.6
(as shown in the following figure).
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
EMC AutoStart Agent and Console 189
"Taking the CallPilot
211).