Emc Autostart Agent And Console - Nortel CallPilot Install Manual

182 Chapter 6 Maintaining a High Availability system
18
19
20
21
22
23
24
25

EMC AutoStart Agent and Console

The EMC AutoStart software is used to maintain a High Availability system.
This section includes the following:
•
•
•
Copyright © 2007, Nortel Networks
.
•
If on a domain, select the domain name associated with the
computer. For example, nortel.innlab.com
Note: If you are on a domain, both the local host name and
the domain name are available in the Log on to drop-down
list. Select the name you want to change.
Enter the Old Password.
Enter the New Password.
Reenter the new password in the Confirm New Password field.
Click OK.
Change the administrator password for each of the Utility Processes.
For more information, see
administrator password" (page
Perform a manual failover on CP2. For more information, see
"Initiating a manual failover" (page
Result: The CallPilot resource group is automatically brought online
on the standby High Availability server (CP1).
After the CallPilot resource group is online on CP1, restart CP2.
On CP1, do the following:
a. Launch the AutoStart Console.
b. Wait until node CP2 and both drvE and drvF are online/green in
the AutoStart Console.
c. Enable monitoring for the CallPilot resource group. For more
information, see
(page 214).
"AutoStart maintenance" (page 183)
"Work with resource groups" (page 208)
"Software operations" (page 216)
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
"Changing the Utility Processes
164).
215).
"Enabling automatic failovers (start monitoring)"
—End—