Nortel CallPilot Install Manual page 62

62 Chapter 5 Install and configure the High Availability pair
30
31
Copyright © 2007, Nortel Networks
.
The following table shows the suggested default values for HB1,
HB2, and MIRROR on CP1. If you do not use these suggested
values, ensure that you use your new values throughout the
configuration.
Network Interface Card
(NIC)
Heartbeat 1 (HB1)
Heartbeat 2 (HB2)
MIRROR
Click Next.
Result: The Ready to Configure page appears.
Figure 23
Configuration Wizard: Ready to Configure
Click Finish to start process.
Result: The system starts the configuration process and the
Progress Information screen appears.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
IP Address Subnet Mask
192.0.0.10 255.255.255.0
194.0.0.10 255.255.255.0
193.0.0.10 255.255.255.0