Run The Setup Wizard On Cp2 - Nortel CallPilot Install Manual

Feature Expansion: Adding the High Availability feature to an existing CallPilot 5.0 1005r server 267

Run the Setup Wizard on CP2

Run the Setup Wizard on the new 1005r server (CP2), restoring the data
from the backup created by the Upgrade Wizard that was run on CP1.
Running the Setup Wizard on CP2
Step
1
2
Copyright © 2007, Nortel Networks
.
CAUTION
Ensure you use the backup created from the CallPilot
5.0 Upgrade Wizard for the following reasons:
1. The backup provides the most current view of the
system.
2. The CallPilot 5.0 Upgrade Wizard corrects the data prior
to the backup.
3. Using an earlier backup can result in issues encountered
during the restore process.
4. The backup from the CallPilot 5.0 Upgrade Wizard
includes the CallPilot 5.0 Upgrade Wizard logs so that
they can be brought forward to CallPilot 5.0. These logs
can be used by Nortel Enterprise Technical Support
(NETS) to troubleshoot the system.
Action
Log on to the new CallPilot 1005r server after the Windows
Mini-Setup is complete. The default password for the Administrator
account is Bvw250.
The Setup Wizard automatically launches if you log on to an
unconfigured CallPilot server. A CallPilot server, freshly upgraded
to CallPilot 5.0, is not configured. You can also launch the Setup
Wizard manually by clicking Start > Programs > CallPilot > Setup
Wizard.
Result: The CallPilot Setup Wizard welcome screen appears.
Note: If you exit after a successful restore and before the Setup
Wizard is finished, you can continue or restart the Setup Wizard.
If your backup is on a network drive or you are downloading PEPs
from the network, you must restore your network settings:
a. Specify the IP address and subnet mask for the Nortel server
subnet. Do not change your computer name unless necessary.
b. Specify the gateway for the Nortel server subnet (CLAN).
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007