Nortel CallPilot Install Manual page 58

58 Chapter 5 Install and configure the High Availability pair
20
21
22
Copyright © 2007, Nortel Networks
.
Note: To automatically provision a number of channels, you
can enter the information for one channel, select the number
of channels required, and then click Fill. The Configuration
Wizard automatically datafills the channels, and increments
the TNs, ACD Position ID, and SCN.
Note: This is the CP1 switch-provisioning information for the
switch. To obtain the CP1 switch-provisioning information, see
the completed Table 3 "High Availability system checklist" (page
25).
Click Next.
Result: The Meridian 1 CDN Information page appears.
Figure 19
Configuration Wizard: Meridian 1 CDN Information page
Click New to add a new CDN.
Result: The CDN Details page appears.
The CDNs on both CP1 and CP2 must be the same.
On the CDN Details page, do the following:
a. In the CDN field, enter the new CDN.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
ATTENTION