Nortel CallPilot Install Manual page 181

6
7
8
9
10
11
12
13
14
15
16
17
Copyright © 2007, Nortel Networks
.
•
If on a workgroup, select the local host name of the computer.
For example, P1005r (this computer).
• If on a domain, select the domain name associated with the
computer. For example, nortel.innlab.com
Note: If you are on a domain, both the local host name and
the domain name are available in the Log on to drop-down
list. Select the name you want to change.
Enter the Old Password.
Enter the New Password.
Reenter the new password in the Confirm New Password field.
Click OK.
Perform a manual failover on CP1. For more information, see
"Initiating a manual failover" (page
Result: The CallPilot resource group is automatically brought online
on the standby High Availability server (CP2).
Restart CP1.
Move the dongle to CP2.
For more information about the dongle, see 1005r Server Hardware
Installation (NN44200-308).
On CP2, do the following:
a. Launch the AutoStart Console.
b. Wait until node CP1 and both drvE and drvF are green/online in
the AutoStart Console.
c. If required, disable monitoring for the CallPilot resource group.
For more information, see
monitoring)" (page
On CP2, press Ctrl+Alt+Del to display the Windows Security
window.
Click Change Password.
Result: The Change Password window appears.
Enter the User Name of the administrator account.
From the Log on to field, select one of the following:
• If on a workgroup, select the local host name of the computer.
For example, P1005r (this computer).
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
Working with domains and workgroups 181
215).
"Disabling automatic failovers (stop
213).