Nortel CallPilot Install Manual page 152

152 Chapter 6 Maintaining a High Availability system
4
5
Copyright © 2007, Nortel Networks
.
b. Right-click the drive you want to connect.
c. Select Attach Data Source.
Use the Windows Services utility to manually start the following
CallPilot services individually and in the following order:
• Adaptive Server Anywhere - DB_SQLANY
•
CallPilot HAL Monitor
• CallPilot LDAP
• CallPilot AOS
• CallPilot Multimedia Volume 1
• CallPilot Multimedia Volume 102
•
CallPilot Multimedia Volume 103
• CallPilot Multimedia Cache
Log on to CallPilot Manager and run the Configuration Wizard as
follows:
a. On the main CallPilot Manager screen, click the Configuration
Wizard icon.
Tip: You can also start the Configuration Wizard by clicking
Tools > Configuration Wizard.
Result: A dialog box appears, prompting you to choose either
an Express or Standard setup.
b. Select OK to dismiss the dialog box.
Result: The Configuration Wizard: Configuration Mode screen
appears.
c. Select the CallPilot Individual Feature Configuration
(Express Mode) option and then click Next.
Result: The Configuration Wizard: Express Configuration List
screen appears.
d. Select the Network Interface Card Configuration (ELAN and
CLAN) check box.
e. Change the ELAN or CLAN network setting as required.
f. Click Next.
Result: The Ready to Configure screen appears.
g. Click Finish.
Result: A dialog box prompts you to confirm the configuration.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007