Nortel CallPilot Install Manual page 158

158 Chapter 6 Maintaining a High Availability system
Changing the Managed CLAN IP address
Step
This procedure changes only the Managed CLAN IP address. (It does not
change the physical CLAN IP settings.)
1
2
3
4
5
6
Copyright © 2007, Nortel Networks
.
c. Edit the VirtualHostname with the new Managed CLAN host
name.
d. Save the file.
Action
Change the Managed host name mapping to the new Managed
CLAN IP address on your DNS server or in the appropriate hosts file.
Disable the AutoStart Monitoring. For more information, see
"Disabling automatic failovers (stop monitoring)" (page
Take the CallPilot resource group offline. For more information, see
"Taking the CallPilot resource group offline" (page
Open the AutoStart Console and delete the Managed CLAN IP
resources in the Startup and Shutdown sequences by doing the
following:
a. Expand [AutoStart_Domain] > Resource Groups.
b. Select the CallPilot resource group.
c. Select the Settings tab.
d. Under Startup Sequence, select the Managed CLAN IP address
and click Delete.
e. Under Shutdown Sequence, select the Managed CLAN IP
address and click Delete.
On the AutoStart Console, delete the Managed CLAN IP resource in
the IP resource list by doing the following:
a. Expand [AutoStart_Domain] > IP Addresses.
b. Select the Managed CLAN IP address.
c. Select the Settings tab.
d. Click Delete Interface.
Create the new Managed CLAN IP resource by doing the following:
a. Expand [AutoStart_Domain] > IP Addresses.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
—End—
213).
211).