Nortel CallPilot Install Manual page 167

Copyright © 2007, Nortel Networks
.
b. Select OK to dismiss the dialog box.
Result: The Configuration Wizard: Configuration Mode screen
appears.
c. Select the CallPilot System Configuration (Standard Mode)
option and then click Next.
Result: The Configuration Wizard: Welcome screen appears.
d. On the Welcome screen, click Next.
Result: The Keycode and serial number screen appears.
e. Enter your Serial number and the new Keycode. This new
keycode includes the increased licenses.
f. Ensure that the Serial number and Keycode are correct, and
then click Next.
Result: The Feature Verification screen appears.
g. Ensure that the details on the Feature Verification screen match
your expectations and click Next.
Note: If a feature is missing or is not what you expected,
acquire a new keycode from your Nortel distributor.
Result: The Server Information screen appears.
h. Verify the information on the Server Information screen, modify it
if necessary, and then click Next.
Result: The Password Information screen appears.
i. Select the Leave the password unchanged option. (If
prompted, change the default password. Store the password
in a safe location.)
j. Click Next.
Result: The Multimedia Allocation screen appears.
k. Verify the number of MPB boards and, if applicable, DSP cards,
and ensure that they match the hardware installed in the CallPilot
server. Verify the Port Allocations.
l. Click Next.
Result: The Switch Information screen appears.
m. Ensure that the following settings are correct on the Switch
Information screen and click Next.
Result: The CDN Information screen appears.
n. Verify the CDN configuration and click Next.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
CallPilot Configuration Wizard 167