Nortel CallPilot Install Manual page 263

Feature Expansion: Adding the High Availability feature to an existing CallPilot 5.0 1005r server 263
For Scenario 1, you do not have to perform the following procedure because
a backup was created when you ran the Upgrade Wizard during your
upgrade or migration process.
For Scenario 2, you must complete the following procedure.
Running the Upgrade Wizard on CP1
Step
1
2
3
4
5
6
7
8
9
Copyright © 2007, Nortel Networks
.
Action
Launch the CallPilot 5.0 Upgrade Wizard by clicking Start >
Programs > CallPilot > Upgrade Wizard.
Note: While the CallPilot 5.0 Upgrade Wizard runs, all screen
information is written to the log file in the following folder:
D:\Nortel\Data\UpgradeWizard.log
Result: The CallPilot 5.0 Upgrade Wizard - Welcome screen
appears.
On the CallPilot 5.0 Upgrade Wizard - Welcome screen, click Next.
Result: The Platform Validity Check screen appears, which lists
the software and hardware currently on the system, and evaluates
the status of each item.
Click Next to continue.
Result: The CallPilot 5.0 Upgrade Wizard checks your software
version.
Wait while the CallPilot 5.0 Upgrade Wizard analyzes your platform.
Result: The Platform Validation screen appears.
Click Next.
Result: The Checking Computer Name screen appears.
Click Next.
Result: The Checking Free Disk Space screen appears.
Click Next to determine if your data is valid and can be upgraded
to CallPilot 5.0.
Click Next to validate your data.
Result: The Performing Data Validity Check screen appears. A
process bar shows how much of the data has been validated.
Click Next.
Result: The Serial Number and Key Code screen appears.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007