Install The Autostart Agent And Console Software; Install The Autostart Software On Cp1 - Nortel CallPilot Install Manual

7

Install the AutoStart Agent and Console software

The High Availability feature uses the AutoStart 5.2.2 software that must
be installed on both servers. The AutoStart software includes both Agent
and Console software.
There can also be AutoStart software patches that must be installed. SUs
and PEPs are found in the Enterprise Solutions PEP Library (ESPL), which
can be accessed at the following Web site:

Install the AutoStart software on CP1

The following procedure installs the AutoStart 5.2.2 Agent and Console
software on server CP1. This procedure takes approximately 10 minutes.
Installing the AutoStart Agent and Console software on CP1
Step
The computer name must be set before you install the AutoStart software. The
software requires the computer name. The computer name must contain only
alphanumeric characters. Nonalphanumeric characters (such as a hyphen [-])
are not supported.
If you want to change the computer name after installing the server you must
uninstall and then reinstall the AutoStart software.
1
2
3
Copyright © 2007, Nortel Networks
.
Click Yes to confirm the exit from the High Availability Wizard.
Note: Within the AutoStart software, the two CallPilot servers are
included in an AutoStart domain. The name of the domain must be
unique within the network. For the purposes of this document, the
domain name [AutoStart_Domain] is used. This value must be
replaced with the AutoStart domain name to be used by the customer.
The AutoStart Domain has no association with the customer's network
domain and is used only by the AutoStart software.
Action
Insert the CallPilot Application CD.
Navigate to the Z:\EMC folder on the CallPilot Application CD.
Double-click the EAS522_WIN-x86.exe file to start the installation.
Result: The InstallShield Wizard dialog box appears and informs
you that the AutoStart 5.2.2 software requires that the Microsoft .NET
Framework be installed before you install the AutoStart software.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
Install the AutoStart Agent and Console software
—End—
www.nortel.com/espl
ATTENTION
79