Nortel CallPilot Install Manual page 174

174 Chapter 6 Maintaining a High Availability system
Copyright © 2007, Nortel Networks
.
Result: The Feature Verification screen appears.
f. Ensure that the details on the Feature Verification screen match
your expectations and click Next.
Note: If a feature is missing or is not what you expected,
acquire a new keycode from your Nortel distributor.
Result: The Server Information screen appears.
g. Verify the information on the Server Information screen, modify it
if necessary, and then click Next.
Result: The Password Information screen appears.
h. Select the Leave the password unchanged option. (If
prompted, change the default passwords. Save the password
in a safe location.)
i. Click Next.
Result: The Multimedia Allocation screen appears.
j. Verify the number of MPB boards and, if applicable, DSP cards,
and ensure that they match the hardware installed in the CallPilot
server.
k. Change the Port Allocations as required.
l. Click Next.
Result: The Switch Information screen appears.
m. Ensure that the following settings are correct:
• Ensure the switch type and the switch IP addresses are
correct.
• If you are expanding the number of channels, configure the
new channels from this screen.
• After you configure the channels, click Next.
Result: The CDN Information screen appears.
n. Verify the CDN configuration.
If you need to make changes, do the following:
i. Click New to add a new CDN.
Result: The system prompts you for the CDN and the name
of the application to dedicate to the CDN.
ii. Specify the CDN, choose the application, and then click OK.
Result: The system returns you to the CDN Information
page.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007