Activating wireless communication
Activating a new system
You must run System Reevaluation to activate the system.
1.
Enter Configuration programming.
Press ^ . The display shows 1. Telephony Data .
2.
Press & until the display shows 2. Mobility Data.
3.
Press ^ . The display shows Re-Evaluation .
4.
Press ^ . The display shows Re-Eval status.
5.
Press ^ . The display shows Re-Eval required.
6.
7.
Press CONTINUE. The display shows Re-Evaluate now?.
8.
Press YES. The display shows Calls will drop.
9.
Press EXECUTE. The display shows Re-Eval pending.
Press ® to exit. The display shows Re-Eval in prog..
10.
The display shows Radios left:nnn, where nnn represents the number
of radios to be activated.
11.
Wait until the display shows Re-Eval complete before proceeding to the
next section. Press CLEAR to clear the message.
Meridian Companion Installation and Maintenance Guide
Page 97 of 206