Nortel CallPilot Install Manual page 132

132 Chapter 5 Install and configure the High Availability pair
10
Copyright © 2007, Nortel Networks
.
e. Enter the domain administrator and password.
Contact your network administrator for this information.
Result: The Welcome to Domain window appears.
f. Click OK.
Result: A warning window appears prompting you to restart the
computer in order for changes to take effect.
g. Click OK.
Result: The System Properties window appears.
h. Click OK.
Result: The System Settings Changes window appears
prompting you to restart the computer.
i. Click Yes to restart CP1.
j. Log on to CP1 using the domain user account which is a member
of the Domain Administrators group.
On CP2, do the following:
a. Right-click My Computer.
Result: The System Properties window appears.
b. Select the Computer Name tab and click Change.
Result: The Computer Name Changes window appears.
c. In the Member of section, select the Domain option.
d. Enter the name of the domain and click OK.
Result: The Domain Administrator Privileges window appears.
e. Enter the domain administrator and password.
Contact your network administrator for this information.
Result: The Welcome to Domain window appears.
f. Click OK.
Result: A warning window appears prompting you to restart the
computer in order for changes to take effect.
g. Click OK.
Result: The System Properties window appears.
h. Click OK.
Result: The System Settings Changes window appears
prompting you to restart the computer.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007