Nortel CallPilot Install Manual page 198

198 Chapter 6 Maintaining a High Availability system
3
4
Recreate the AutoStart definition file
Use the following procedure to recreate the AutoStart Definition file. To do
this, you must do the following on the fully configured and running CallPilot
5.0 High Availability system:
•
•
For example, you must use this procedure after installing the CallPilot 5.0
PEP, which replaces the AutoStart definition template files used to generate
the definition file on the working CallPilot 5.0 High Availability systems.
Recreating the AutoStart definition file
Step
1
2
Copyright © 2007, Nortel Networks
.
Figure 108
Export dialog box
Select the location and file name for the new definition file to be
created.
Click Export to export the AutoStart configuration data into the
new definition file.
run the High Availability Wizard (HighAvailabilityConfigurationWizard.exe
under D:\Nortel\HA)
reimport the new definition file into AutoStart Console (*.def under
D:\Nortel\HA\ToolkitInstaller2.0)
Action
Open the AutoStart Console on the High Availability server which
had the original definition file previously imported into AutoStart.
Take the CallPilot resource group offline (if it is online). See
the CallPilot resource group offline" (page
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
—End—
211).
"Taking