Nortel CallPilot Install Manual page 168

168 Chapter 6 Maintaining a High Availability system
4
5
6
Copyright © 2007, Nortel Networks
.
Result: The Language Source Directory screen appears.
o. Select the Skip Language Installation option.
p. Click Next.
Result: The CallPilot Local Area Network Interface screen
appears.
q. Verify the settings on the CallPilot Local Area Network Interface
page. Do not change any settings. Ensure that the High
Availability mode check box is selected and the HB1, HB2, and
MIRROR information is correct.
r. Click Next.
Result: The Ready to Configure screen appears.
s. Click Finish.
Result: A dialog box prompts you to confirm the configuration.
t. Click OK to configure CallPilot.
Result: The configuration is applied to the server. This task can
take from 5 to 10 minutes to complete. The Configuration Wizard
displays progress information.
After the configuration is applied to the server, a dialog box
reminds you to restart the server for the configuration to take
effect.
u. Click OK to dismiss the dialog box.
Result: The system returns you to the main CallPilot Manager
screen.
v. Log off CallPilot Manager and close the Web browser.
If prompted, restart the server after the Configuration Wizard is
complete.
Use the AutoStart Console to start monitoring (to enable automatic
failovers). For more information, see
(start monitoring)" (page
Ensure that the CallPilot resource group is online. If it is not online,
bring the resource group online (which starts up CallPilot). For more
information, see "Bring a resource group online" (page
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
"Enabling automatic failovers
214).
—End—
209).