Nortel CallPilot Install Manual page 194

194 Chapter 6 Maintaining a High Availability system
Copyright © 2007, Nortel Networks
.
Field Status
name
Group Online
State
Offline
Online
pending
Preferred
Nodes
Status icons are displayed for each object to indicate the status of
the object. The color of the icon describes the state of the object.
Table 9
Light status
Light
Green
Blue
Yellow
Yellow with a question mark
Red
Red with a question mark
Gray
In the Status of Resource Group Elements area, the Node column
shows on which server the CallPilot services are up and working.
Usually this column shows one CallPilot server node name (active
CallPilot server name) for all the resource group elements (although
the node names do not have to be the same).
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
Description
All resources under the current group
on the current active server are up and
working.
All resources under the current group on
the current active server are down.
Some resources under the current group on
the current active server are up; however,
some services are in either starting or
stopping status.
This area shows all the CallPilot servers
and their overall status.
Status
The object is online and in a working
state.
The object is in a starting state.
The object is in a warning state.
The object is entering warning state.
The object has failed.
The object is failing.
The object is offline.
—End—