IPE cards transmission adjustment capabilities
Table 15
IPE cards transmission adjustment capabilities
non-B34 equipped
trunk card
"hard-coded" B34
equipped trunk card
"flexible" B34
equipped trunk card
non-B34 equipped
line card
"flexible" B34
equipped line card
Upgrade and new installation strategies
There are several versions of IPE cards currently in use. Refer to Table 15 for
a brief summary on the versions and their transmission adjustment
capabilities.
Static Pad
Download
(SPD)
Yes
Yes
Yes
(SLPD takes
precedence)
N/A
N/A
In general, existing systems do not require new flexible B34 IPE cards if their
Loss Plan stays the same. Those systems use the existing Loss Plan.
Newly installed systems have the new flexible B34 cards and can operate
with either the ETSI or the existing loss plan.
Systems using both B34 and non-B34 cards use the existing Loss Plan.
Static Loss Plan Downloading
Static Loss Plan
Download
(SLPD)
No
No
Yes
N/A
Yes
Page 65 of 236
Default Loss
Setting
country specific set
by hardware
country specific set
by firmware
universal value
set by firmware
country specific set
by H/W
universal value
set by F/W
Transmission Parameters