Nortel CallPilot Install Manual page 115

9
10
Generating the AutoStart Definition File
Step
Generating the AutoStart Definition File is required to set the node-specific
settings in the AutoStart Definition Template file.
1
2
Copyright © 2007, Nortel Networks
.
Figure 78
AutoStart Console - Failure Detection and Mirroring tab - Verify Local
and Remote Mirrors
Verify that the value in the Local Mirror Address field is set to the
IP address assigned to the MIRROR NIC on CP1. (The default value
is 193.0.0.10.)
Verify that the value in the Remote Mirror Host field is set to the
host name of node CP2.
Action
In Windows Explorer, navigate to the D:\Nortel\HA folder.
Double-click the HighAvailabilityConfigurationWizard.exe file.
Result: The High Availability Configuration Wizard appears.
The information that was previously entered is automatically loaded
and the node information validation is automatically rerun.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
Configure the AutoStart software 115
—End—