Nortel CallPilot Install Manual page 278

278 Chapter 7 Upgrades, migrations, and feature expansion
19
20
21
22
23
24
Copyright © 2007, Nortel Networks
.
Select the Skip Language CD Validation option.
Result: The CallPilot Local Area Network Interface screen appears.
Use the Language Prompts CD to reinstall languages. When the
CallPilot 5.0 Image was installed on the server, all languages were
removed.
Ensure the language source directory contains CallPilot 5.0 Language
Prompts. Voice prompts from a previous release of CallPilot do not work.
Put the CallPilot 5.0 Language Prompts CD in the CD or DVD drive
and select the Install Language option button.
In the Language CD Location box, enter the path to the CallPilot
5.0 Language Prompts CD and click Next.
Result: The Language Installation screen appears.
Choose the languages that you want to install for the Prompts option,
the Automated Speech Recognition option, and the Primary and
Secondary languages, and then click Next.
Note: The same languages that are installed on CP1 must
be installed on CP2. Ensure that the Primary and Secondary
languages are the same as CP1.
Result: The CallPilot Local Area Network Interface screen appears.
On the CallPilot Local Area Network Interface screen, do the
following:
a. Change the ELAN and CLAN IP address values to the new
values.
Note: The previous ELAN and CLAN IP address values
from the existing CallPilot 1005r server will be reused as the
Managed ELAN/CLAN IP address and host name for the pair
of servers in the new High Availability configuration.
b. Select the High Availability mode check box.
Note: To enable High Availability, a proper keycode is
required and the High Availability Mode check box must be
selected.
c. Enter IP information for the HB1, HB2, and MIRROR network
interface cards.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
ATTENTION