Nortel CallPilot Install Manual page 93

2
3
4
5
Copyright © 2007, Nortel Networks
.
Install the AutoStart Agent and Console software
service is installed on node 1; however, the service is not yet
fully configured so the server cannot start.
Launch the AutoStart Console on CP1 by selecting Start >
Programs > EMC AutoStart Console > EMC AutoStart Console
5.2.
Result: The AutoStart Console appears.
In the Domain pane (left side of the window), click
[AutoStart_Domain] where [AutoStart_Domain] is the domain
name created when you installed the AutoStart Agent.
Note: If the domain is not visible and an error is reported, close
and reopen the AutoStart Console.
Select the Licensing/Security tab.
Figure 52
AutoStart Console - Licensing/Security tab - Add Admin User
In the Valid User List area, enter the following information:
a. In the User Name field, enter administrator.
b. In the Domain/Node field, enter the host name of CP2.
c. For the Access Rights option, select the Administrator option
button.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
93