Nortel CallPilot Install Manual page 269

Feature Expansion: Adding the High Availability feature to an existing CallPilot 5.0 1005r server 269
7
8
9
Copyright © 2007, Nortel Networks
.
c. Restart the system.
d. Log on to Windows and restart the Setup Wizard.
e. Continue to the next step.
If your board configuration is correct, click Next to continue to the
next step.
Note: The following synchronization and disk space checks only
pause for display if the checks fail. Results of the checks are
written to the setup log.
The Setup Wizard performs a disk space check. There must be
enough free disk space to restore your backed up data.
IF the disk
does not have enough
free space
has enough free
space
The data restoration takes from 1 to 3 hours to complete.
Only use the backup created by the CallPilot 5.0 Upgrade Wizard.
On the Selecting Upgrade of the CallPilot screen, choose Yes to
continue with the restore process. Do not choose No.
Result: The Restore Medium Selection screen appears.
Choose the medium on which your backup is stored.
• If you choose to restore from disk:
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
THEN
•
the Checking Free Disk Space screen
appears.
• free up space on drive D by removing
unnecessary files.
•
follow the link on the screen and use the
instructions to free up enough space, and
then click Next.
• the wizard performs another check
and if there is still not enough space,
the Checking Free Disk Space screen
reappears.
•
If there still is not enough free disk space,
exit the wizard and call your support
organization.
• the Setup Wizard continues.
Note: Results of the disk space check are
written to the Setup Wizard log.
ATTENTION