Nortel CallPilot Install Manual page 39

Task
Connect and verify the
LAN connections
Run Stage 1 of the High
Availability Configuration
Wizard to check the
configuration of CP1 and
CP2
Install the AutoStart 5.2.2
software on CP1
Configure licensing and
security on CP1
Install the AutoStart 5.2.2
software on CP2
Configure the AutoStart
software
Note: All configuration is
completed on CP1.
Bring the Resource
Groups online
Copyright © 2007, Nortel Networks
.
Estimated time Procedures required to complete the task
30 minutes –
(page 69)
–
–
5 minutes –
Configuration Wizard to check CP1 and CP2
configuration" (page 75)
10 minutes –
software on CP1" (page 79)
10 minutes –
AutoStart Console on node 1" (page 92)
10 minutes –
95)
35 minutes Configure the AutoStart software on CP1
–
Verification links" (page 109)
–
(page 112)
–
115)
Import the AutoStart definition file on CP1
–
117)
Add the Windows administrator password for
the AutoStart utility processes in the AutoStart
Console
–
password for the AutoStart Utility Processes"
(page 118)
Add e-mail addresses to the Managed_ELAN_IP
_Failure_Notif rule
–
Managed_ELAN_IP_Failure_Notif rule"
(page 120)
10 minutes –
on CP1" (page 122)
–
and CallPilot_[CP2] online" (page 125)
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
New system installation procedure 39
"Connecting and verifying LAN connections"
"Modifying the hosts file" (page 72)
"Testing the host name resolution" (page 74)
"Running Stage 1 of the High Availability
"Installing the AutoStart Agent and Console
"Add the node 2 administrator account to the
"Installing the AutoStart software on CP2" (page
"Modifying the AutoStart Domain and
"Adding the Remote Mirroring Host for CP2"
"Generating the AutoStart Definition File" (page
"Importing the AutoStart Definition file" (page
"Adding the Windows administrator account
"Adding e-mail addresses to the
"Bringing the CallPilot Resource Group online
"Bringing the Resource Groups CallPilot_[CP1]
(optional)