High Availability System Checklist - Nortel CallPilot Install Manual

•
•

High Availability system checklist

Use the following table to plan and track the system settings for your High
Availability servers. These settings are configured using the CallPilot
Configuration Wizard and the High Availability Configuration Wizard.
Table 3
High Availability system checklist
Configuration Wizard: Serial Number and Keycode page
Serial Number
Keycode
Configuration Wizard: Server Information page
Computer Name
Note: Must only include
alphanumeric characters.
Time Zone
Area Code
Country Code
LDAP Search Base
Configuration Wizard: Password Information page
Administrator password
Note: Both nodes must have
the same password.
Copyright © 2007, Nortel Networks
.
Nortel recommends using the account called administrator. However, if
the administrator account is renamed or another administrator account
with a different name is created, use that renamed or new account.
Server Workgroup / Domain Name—This is the Windows Workgroup
/ Domain name. Enter workgroup for the default Windows Workgroup
or enter the real Windows Domain name if both servers in the High
Availability pair have already joined the customer domain.
However, Nortel recommends using the Windows default workgroup to
first configure the High Availability system, and then join the customer
domain after the High Availability system is working (if the system has
to join the domain).
EMC AutoStart Domain Name—This is the unique name for the EMC
AutoStart domain. The EMC AutoStart domain name must be the same
for the pair of High Availability servers. This name must contain only
alphanumeric characters and must have a maximum length of eight
characters.
CP Node 1 (CP1)
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
High Availability system checklist 25
CP Node 2 (CP2)