Nortel CallPilot Install Manual page 242

242 Chapter 6 Maintaining a High Availability system
Creating a backup device (network disk)
Step
For this procedure, CP1 is the active server and CP2 is the standby server.
1
2
3
4
5
6
7
8
9
10
11
Copyright © 2007, Nortel Networks
.
Action
Ensure that the dongle is on CP1 (which is the active server of the
High Availability pair).
On CP1, log on to CallPilot Manager.
Select System > Backup/Restore.
Result: The Backup/Restore window appears.
From the Select a task drop-down list, select Maintain and
configure backup devices.
Under Backup Devices, click Add Device.
Result: The Backup Device window appears.
On the Backup Device window, do the following:
a. Enter a unique Device Name.
b. Enter the Path to the backup device.
c. Verify that the Type field is set to Disk.
d. Under the Connect to network folder as area, enter the User
name and User Password. Then reenter the password in the
Confirm Password field.
This is user name and password to access the path/folder where
the backup is located.
e. Click Save.
Result:The <Device Name>.dev file is created in the
D:\Nortel\Data\backup\Devices folder.
On CP1 (the active server), navigate to folder D:\Nor-
tel\Data\backup.
Right-click the Devices folder and select Sharing and Security.
Result: The Devices Properties window opens.
Select the Sharing tab.
Select the Share this folder option.
Click Permissions.
Result: The Permission for Devices window opens.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007