Nortel CallPilot Install Manual page 136

136 Chapter 6 Maintaining a High Availability system
Changing the Server Information
Step
Use this procedure to change the time zone, dialing information, and LDAP
search base.
1
Copyright © 2007, Nortel Networks
.
Action
On CP1 (the active High Availability server) do the following:
a. Ensure the dongle is plugged into CP1. If the dongle is not on
CP1, move it to CP1 and wait for three minutes.
For more information about the dongle, see 1005r Server
Hardware Installation (NN44200-308).
b. Launch the AutoStart Console.
c. Stop monitoring on the CallPilot resource group. For more
information, see
(page 213).
d. Log on to CallPilot Manager on CP1 and start the Configuration
Wizard.
e. Select the CallPilot Individual Feature Configuration
(Express Mode) option and then click Next.
Result: The Configuration Wizard: Express Configuration List
screen appears.
f. Select the Server Information check box.
Result: The Server Information window appears.
g. If necessary, change the Time Zone, Dialing Information, or
LDAP Search Base.
Note: Do not change the computer name using this
procedure, see
h. Click Next.
Result: The Password Information window appears.
i. Select the Leave password unchanged option.
Note: Do not the change the password using this procedure,
see "Administrator account changes" (page
j. Click Next.
k. Click Finish to complete the Configuration Wizard.
l. Perform a manual failover. For more information, see
a manual failover" (page
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
"Disabling automatic failovers (stop monitoring)"
"Computer name changes" (page
215).
138).
140).
"Initiating