Nortel CallPilot Install Manual page 231

11
Copyright © 2007, Nortel Networks
.
In the Removal Method window, select the following:
a. Under AutoStart Agent, select Completely Uninstall EMC
AutoStart Agent.
Result: The Completely remove EMC AutoStart configuration
(modules, etc.) check box appears.
b. Select Completely remove EMC AutoStart configuration
(modules, etc.) check box.
c. Under AutoStart Console, select Completely Uninstall EMC
AutoStart 5.2 Console.
d. Click Next.
If the AutoStart Console is in use, the following message
appears. Click OK to dismiss the message.
Figure 145
AutoStart Console in use message
Result: The Remove the Program window appears.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
EMC AutoStart Agent and Console 231